\n\nAbout A Turkish Long Neck Saz\nIn almost every region of Turkish folk music, the most commonly used instrument is a seven and nine stringed, wooden string instrument with a width of about two octaves played with a plectrum.\u00a0It is estimated that the word Long Neck Saz was first used in the 18th century. The name of the instrument is thought to be inspired by the connection of the curtains and wires on the handle. The most used types of long neck saz are more than one type; cura, collapse, dombra, two-wire and tanbur. The tuning pattern varies greatly depending on the region in which it is performed.\nThe long neck saz consists of three main parts; boat, chest, handle.\u00a0The boat part is usually made of mulberry tree. However, in addition to mulberry tree, juniper, chestnut, walnut, hornbeam is also made from trees. The chest is made of spruce and the stem is made of hornbeam, white hornbeam or juniper.\nThe smallest and thinnest sound instrument of the long neck saz family is Cura. Tanbur is a bit bigger than Cura and it gives an octave thick sound than Cura. "Divan Saz\u0131"\u00a0 is the thickest instrument of the long neck saz family. It gives an octave thick sound relative to the tanbur.\n\u00a0\n\n\u00a0\nHow To Tune A Turkish Long Neck Saz\nWe need to know which auger is connected to which wire in order to be able to make the long handle (black pattern) binding accordion.In long shank bonding, the wires are generally tuned to the ground pattern:\u2022 La (lower wire)\u2022 Re (Middle Wire)\u2022 Left (Top Wire)\nNote names are used for reference only. The reference notes are used only to know the difference in sound between the wires (Bottom, Middle, Top). The decision sound is indicated before the binding is tuned. After specifying the decision sound, the wires are tuned according to the decision sound. The decision is made according to the voice of the artist, the voice, the binding, the ear, and other situations.Also make sure that the environment is quiet when tuning the long neck saz, and then try to tune your device starting with the desired wire group. Continue until the letter appears on the device for the desired decision.(lower wire - middle wire - upper wire) > respectively.Bottom wires: B or CCenter wires: E or FUpper wires: A or B\n\u00a0\n\n\u00a0\nAdvice for Beginners\nThe person who plays the long neck saz must determine the style of music he will play and decide which long neck saz he will use, the person who will play the long neck saz should know and decide on the long handle and the short handle, but it will be healthier for the beginners to start playing with the long handle.\n\u00a0\nIn this video we explain How To Tune A Turkish Long Neck Saz\u00a0\n\n\u00a0\nWhich lesson you want be next?